OSPF Core Configuration

1. Configure OSPF for the above network diagram. R1 will acts as an ASBR by redistributing a series of static routes into the OSPF network. These routes should NOT increment their metric as they pass through the network and should have an initial OSPF cost of 200. All routers should have a router-id reflecting their hostname; you should be able to ping this router-id throughout the entire OSPF network.

2. After completing the initial step of the lab, one of the routers in Area0 will become the DR and one will become the BDR, for the Ethernet segment. Which router will become the DR and BDR? Write DR and BDR next to the respective router below.

  • R1
  • R2
  • R3

3. Ensure R1 becomes the DR on the Ethernet segment in Area 0. R2 and R3 should not become DR or BDR for the Ethernet segment in Area 0. After this change is made, what type of neighbor relationship should exists between R1 and R2? What about R2 and R3?

4. Implement summarization at the ABRs in the network to make the routing tables throughout the network as efficient as possible.

5. Implement summarization at the ASBR. The summary route should have the same attributes as the original, individual routes redistributed into the network.

6. The organization plans to upgrade to Gigabit Ethernet int he coming months. OSPF should accurately calculate its metric assuming Gigabit Ethernet will be fastest link in the network.


To configure the static route:
R1(config)# ip route null0
R1(config)# ip route null0
R1(config)# ip route null0
R1(config)# ip route null0
To redistribute:
R1(config)#router ospf 1
R1(config)# redistribute static subnets metric 200 metric-type 2



Operating System case studies notes

Hello guys, plz find the solution for some of the questions of the case studies. I have tried to complete some of the questions raised by Mr. Balaram Sharma. If you still have confusion plz let me know. For detail plz go thru the Modern Operating System Tanenbaum.

Good Luck for your exam.